Category not found

  • UJV-160 icon

    The following items are supplied with the JV33 Series:

    UJV-160 Series Printer

    • 8 x Pre-Fill Cartridges
    • 1 x full set of 8 ink cartridges
    • Roll Take-Up System
    • Solvent Cleaning kit with cleaning fluid
    • Mimaki RasterLink Pro V SG Software RIP (PC)
    • Operation & Maintenance Guides
    • One year onsite manufacturers parts and labour warranty

    Optional Items

    • Extended Warranty/Service Contract
    • Flatbed Tables (Supplied as standard with non-RR model)
  • Manufacturers Specifications for the UJV-160.

    Print Head
    On-demand Piezo head
    Print Resolution
    600 dpi, 1200 dpi
    Ink Type
    UV-curable fl exible ink (5 colour: C, M, Y, K, W)
    UV-curable hard ink (5 colour: C, M, Y, K, W)
    Max Capacity
    1,200 cc (600 cc x 2 ink packs)/colour
    Maximum Print Width
    Roll: 1,610 mm (63,3”), Rigid: 1,600 mm (63.0”)
    Media Width
    1,620 mm (63.7”)
    Max. 10 mm (0.39”)
    Roll: less than 25 kg (55 lbs.)
    Rigid: less than 12 kg (26.5 lbs.)
    Roll Diameter
    Inside: 2 inch, 3 inch / Outside: Less than ø 180 mm (7.1”)
    Media Cutting
    Manual cutting
    Ink Curing
    UV LEDs
    Media Heater
    Pre/print heater
    Media Take-up Device
    Roll take-up device (Standard), inside/outside selectable
    USB 2.0
    Applicable Standard
    VCCI class A, UL60950-1, FCC class A,
    CE marking (EMC directive, low voltage directive), CB report, RoHS
    AC100V~120V, 200~240V±10%, 50•60Hz±1Hz, less than 1.68KVA
    Operating environment
    15ºC~30ºC, 35~65%Rh (No condensation)
    (W x D
    x H)
    Main Unit  3300mm x 780 mm x 1290 mm (129.9" x 19.9" x 50.7")
    Max. Capacity & Media Stand
    3300 mm x 4300 mm x 1290 mm (129.9” x 169.3” x 50.7”)
    (Main unit and table with support wire)
    Weight Main Unit
    260 kg (573 lbs.)
    Media Table
    50 kg (110 lbs) x 2 units
  • ItemColourCodeDetails
    LF-200 Flexible UV ink
    SPC-591 C/M/Y/K/W
    600 cc pack
    LH-100 Hard UV ink
    SPC-0597 C/M/Y/K/W
    F-200 cleaning cartridge
    440 cc cartridge
    • Ventilation is required since volatile substances are emitted from non-curing UV ink.
    • Post-printing performance (adhesion, weather durability, etc.) varies according to the media.
    • If substrates other than described are to be used, please test beforehand.
    • Adhesion performance differs according to the substrate. In some cases optimisation of ink and anchor coat / overcoat are necessary.